Home › Forums › XMODS MAIN › Motor Upgrades

Stage 2 Motor confusion

2 replies [Last post]
Mon, 08/13/2007 - 21:16
johnling
Joined: 08/07/2007
User offline. Last seen 34 weeks 3 days ago.

I have the Stage 2 motor upgrade. I want to put it in my Titan truck. I am unsure of the gears to use. What is the stock ratio? I have not disassembled the truck yet so I'm not sure if it is marked inside yet. I want the truck to be faster but not too fast for smaller tracks like the RS Oval. I was considering the 11-23 set. Not knowing how that deviates from the stock setup I'm at a loss.

Thanks!

Top
Mon, 08/13/2007 - 22:34
#1
johnling
Joined: 08/07/2007
User offline. Last seen 34 weeks 3 days ago.
Re: Stage 2 Motor confusion

Junk-mod-er wrote:
10/11-23 will work fine for an oval setup.

The stock gearing is 9-24.

~Junk ET
PS: Remember to use the right spacer underneath the motor. :wink:

Thanks! I went with the 11-23. It didn't seem to make a big difference. I should have run it for a while before I changed the motor then I may have been more able to guage the difference. I think I'll put the next two in the Scion and Bumblebee. I think I may go with the 12-23 in those.

I run the Pro-Pulse buggies and truck with the high speed motor and suspension upgrades. That means you need a lot of room to enjoy running them. The 11-23 ratio with the stage 2 motor is still very nimble and turns tight.

johnling

Top
Mon, 08/13/2007 - 21:59
#2
Junk-mod-er
Joined: 03/25/2006
User offline. Last seen 2 years 28 weeks ago.
Re: Stage 2 Motor confusion

10/11-23 will work fine for an oval setup.

The stock gearing is 9-24.

~Junk ET
PS: Remember to use the right spacer underneath the motor. :wink:

Top