I posted this tut on xmsand decided to repost her hope u like!!

Here is what you'll need.

Step 1: First take the marker and mark the center of the flat area on the bumper.

Step 2: Now drill a hole there with the smaller drill to start.

Step 3: Now widen this hole the bigger one.

Step 4:Now insert the gen 1 acel stub into the hole.

You may have to do it this way depending on the height of the truck.

Step 5: Now screw the lug nut onto the acel stub.

And there you go.

Here's how to do it on a hummer.

You will need.

Step 1 Hummer: Drill the reciver hole out with ONLY the sm. drill

Step 2 Hummer: Mark the back of the metal or plastic peice and drill it with the sm. drill ONLY.

Step 3 Hummer: Now attach this piece with a short screw and lug nut.

Now follow steps 1-5 as if this were a truck bumper!!

Here is my truck, i wired the trailer up with lights for a realist touch, the trailer is part of a Wal-Mart Model (most people use this one)For mine i use a triangular piece of plastic to make it turn better, look better, and for a place to incoprerate a plug for the lights. In order to make it the way i did on my titan is very easy, just do that same thing 2 times once the bumper to the piece of plastic, but use a short screw so it is tighter and doesn't wigle around, and then 1 more time the plastic to trailer.